Dent Removal Repair Tool Kit

The amazing Dent Removal Repair Tool Kit has an amazing bridge design, created to efficiently reduce the risk of further damage. The new adhesive system design guarantees dent removal without the obnoxious sticky residue that other systems are known to leave behind. No chemicals or other toxic materials are included which will keep the original paint protected during the process. This is a paintless ding & dent repair.

Repair dents on almost any part of any vehicle- The Dent Removal Repair Tool Kit quickly removes dents caused by hail, car doors, shopping carts and more, without destroying the surface of your car.

How to use it? Gently twist the nut in the middle of the bridge dent puller, to completely and efficiently repair the dents. Use enough glue to create a solid grasp cushion of about 1-2 millimeters between the metal and the puller pad. It’s important to press the tool instantly to operate on the surface. 

1. Clean the damaged surface with a damp clean cloth

2. Heat glue for about 5-10 min

3. Apply the glue to the drawing gasket (not car)

4. Directly place the pad in the center of the dent and hold until it sticks

5. Place the stem of the pad into the hole in the pulling bridge and screw knob

6. Tighten knob until the dent comes up

7. Clean surface

Do not let the glue harden completely. It will just break off when you pull the dent. As you pull the dent you should see the glue stretch lightly, and there will be a unique metal popping sound if done properly.

Tip: This tool is not suitable for corners or creases.

The reliable Dent Removal Repair Tool Kit is made of rubber and tough plastic. It comes with 5 different sizes of suction tabs for your selection. Now you can get your car back to its original condition swiftly and easily!